home.markdown

@@ -87,22 +87,16 @@ Circuit
 
 
 
-* blah
+* Connect the jumper wires to the button pad breakout board as shown below.
 ![alt text](images/board.jpg)
 
-![alt text](images/hot_glue1.jpg)
-
-![alt text](images/hot_glue.jpg)
-
-### GPIO
-
-![alt text](images/gpio1.jpg)
-
-![alt text](images/board_and_pi.jpg)
-
 
 
+* If you are using wire segments instead of header pins, then you will probably want to glue the jumper wires to the wire segments using hot glue or preferably epoxy:
+![alt text](images/hot_glue1.jpg)
 
 
 
 
+* Connect the other ends of the jumpers to the Raspberry Pi board to implement the schematic.
+![alt text](images/gpio1.jpg)