home.markdown

@@ -48,15 +48,10 @@ RasPiDrum
 
 * First glue the top onto two sides, as shown below.  **However, don't glue the bottom on -- the bottom will remain loose, at least for now, while you test your RaspiDrum.**  However, you should insert the bottom piece on, even while gluing the other sides, so that the bottom will later fit snugly on.  It's helpful to use Dewalt clamps (or other carpenter's clamps) if they are available.
 
-
-* Then, the next step will be to glue the other two sides on.  The image below shows the glue starting to be laid out upon the side that will be glued on next (not shown).
-
 ![alt text](images/glue_side.jpg)
 
+* Then, the next step will be to glue the other two sides on.  The image above shows the glue starting to be laid out upon the side that will be glued on next (not shown).
 
-* 
-![alt text](images/top_box.jpg)
 
-![alt text](images/box_1.jpg)
 
 ![alt text](images/box_3.jpg)